O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 2)
P0141 is an OBD-II trouble code that indicates o2 sensor heater circuit malfunction (bank 1 sensor 2). This page explains what the code means, what issues may trigger it, common symptoms and where to look next.
P0141 code meaning is one of the most common OBD-II searches when a warning light appears on the dashboard.
Drivers searching for P0141 usually want to know what the code means, whether the car is safe to drive and what part may need testing first.
Likely causes
- • Faulty sensor
- • Damaged sensor wiring
- • Loose or corroded connector
- • Open circuit or short circuit
- • Poor electrical connection
- • Failed heater element
Symptoms
- • Check engine light illuminated
- • Intermittent warning light
- • Inconsistent engine performance
- • Increased emissions
- • Reduced fuel efficiency
Severity
Low to Medium
Can you keep driving?
Whether you can keep driving depends on how the vehicle is behaving. If there is rough running, loss of power, overheating or stalling, diagnose it as soon as possible.
Common fix areas
- • Test the oxygen sensor and heater circuit
- • Inspect exhaust leaks before the sensor
- • Check wiring and connectors
- • Verify live data and sensor voltage
- • Inspect sensor connector and wiring
- • Check continuity, power and ground
Manufacturer notes
FAQs
What does P0141 mean?
P0141 means o2 sensor heater circuit malfunction (bank 1 sensor 2).
What can cause P0141?
Common causes include component failure, wiring faults, incorrect sensor readings, leaks, pressure issues or related upstream faults in the same system.
Can I keep driving with P0141?
That depends on how the car is behaving. If there is rough running, overheating, loss of power or stalling, it should be diagnosed quickly.
Does P0141 always mean I need a new part?
No. A fault code points you to a system or condition, but proper diagnosis is still needed before replacing parts.